Dynamic Engineering - www.dyneng.com
Carriers Adapters Converters
Dynamic Engineering Product Pages
Order Cables
Order Chassis
Order cPCI
Order IndustryPack Modules
Order Misc.
Order PCI
Order PCI-X
Order PCIe
Order PMC
PC104 PCI104 PC104p
View Cart
     

PC104 PCI104 PC104p

 
Cable-MDM9-Spacewire
SpaceWire cable available in stock and custom lengths. Multiple options for connectors and wiring. Standard SpaceWire - male:male with TX/RX reversal. Contact the factory for other options or go to the SpaceWire cable page http://www.dyneng.com/SpaceWireCable.html


Quantity
 
DESWBO
Dynamic Engineering SpaceWire Break-Out (DESWBO) Install between two SpaceWire nodes and monitor the signals between the two nodes. 24 test points per node [48 total], Credit/Byte count, decoded data, decoded characters NULL, FCT, Timecode received, EOP, EEOP, Credit Error, Disconnect Error, Escape Error, Parity Error. Activity LED's. International Power Supply included.
Quantity
 
pc104p_biserial3_f_sm.jpg PC104p-BiSerial-III
PC/104+ module with DMA, FIFOs, RS485/LVDS (16)transceivers, programmable direction and termination, 4-DAC, 4-ADC, TTL port



Please select board option and Engineering Kit
Quantity
 
pc104pchassis_open_sm.jpg PC104p-Chassis
Select Chassis Size & Corresponding Options Below
Units Are Customizable~Let Us Know What You Need.
Quantity
 
PC104p-COOL
Fan card available in PC104, PC104p, and PCI-104 configuration with 2 fan install locations. Select air flow direction and number of fans installed. Fans are "Zero Slot" and do not take an extra position other than the Cool Card module position.


Please select your fan options and orientation below
Install locations - fill in the locations, and direction of the air flow. The default selection is "NI" Not-installed locations.
Fan direction:
F= Fan blows back to front
R= Fan blows front to back
Selecting HV fans will require a spacer not included
Please select module type - PCI-104 [PCI connector only] PC104p[Both Connectors], PC104[ISA side only]
Quantity
 
PC104p-RPP
Reverse Power Protection card available in PC104, PC104p, PCI-104, and stand-alone configurations with optional fan. Select air flow direction. Fan is "Zero Slot" and does not take an extra position other than the RPP Card module position. Reverse Power Protection accomplished with FET technology for very low voltage drop at the bridge.


Please select your fan options and orientation below
Install locations - fill in the direction of the air flow. The default selection is "NI" Not-installed
Fan direction:
F = Fan blows back to front
R = Fan blows front to back
Selecting HV fans will require a spacer not included
Please select module type - PCI-104 [PCI connector only] PC104p[Both Connectors], PC104[ISA side only] Stand-Alone [no bus connectors]
Quantity
 
pc104p_spacewire_f_sm.jpg PC104p-Spacewire
PC104p and PCI-104 options with 4 SpaceWire ports. Rev K Firmware. Linux, Windows, VxWorks support.

Select PC104p / PCI-104 Form Factor, Engineering Kit, Driver & Development Tool Options:
Quantity
 
PC104p2PMC
The PC104p2PMC (PCI-104 to PMC) adapter/carrier converter card provides the ability to install a PMC card into a standard PCI-104 slot. Option for Pn4 I/O breakout available.

Please select I/O and processing options:
Quantity
 
pc104p4ip_sm.jpg PC104p4IP
PC104p4IP is a PC/104+ carrier design with 4 IP slots


Quantity
 
pc104pip_f_sm.jpg PC104pIP
PC104pIP allows you to install an IndustryPack module into the PCI-104 or PC104p stack. The PCI bus is converted with an FPGA to support the IP control bus. Standard IP voltages are supported with fused filtered power. Windows and Linux drivers available - included with purchase. 32 bit data widths automatically converted to double 16 bit accesses for faster operation.
Quantity
 
pc104ppwr12_sm.jpg PC104pPWR12
PC104pPWR12 power supply provides for the +5, +3.3, +12, minus 12 and minus 5 from a 12V wall mount transformer supply, battery etc. Each rail is fuse protected. The supply uses switching technology to provide high efficiency coupled with low pass filtering to provide low noise and fast response to transient loads. Available with PCI-104, PC104p, and PC104 configurations. Industrial temperature components.

Board Options
Quantity
 
pc104ppwr28_sm.jpg PC104pPWR28
Rugged PC104, PC104p, PCI-104 Power Supply - 12V, 5, 3.3, VIO, -12V, -5V supplied from 28V reference [14-34V] Industrial Temp components. Conduction and convection cooling. Reverse Power Protection available.

Board Options
Quantity
 
PCI2PC104p
Use your PCI-104 or PC/104p board in a standard PC. Two orientations supported for Production and Test. Note: only PCI interface is supported. ISA connector has mounting mounts only. In the Production position, the PCI-104/PC104p card is mounted completely within the framework of the PCI adapter. With the Test orientation the PCI-104 card is rotated to be above the PCI adapter allowing access to both sides of the device and better access within a chassis. The test version has test points installed on the PCI signals.

Please select version from below:
Quantity
 
pcibpc104p-et_f_sm.jpg PCIBPC104p-ET
Use your PC/104p boards in a standard PC. Two orientations supported for production mode and test.
Quantity
 
PCIe1LPCIe104
$400.00
PCIe1LPCIe104 (PCIe PCIe104) adapter / carrier converter card provides the ability to install one PCIe104 card into a standard PCIe slot. Slots with 1 or more lanes are compatible - 1, 4, 8, 16 for example. Built in switching power supply to convert PCIe 12V into PCIe104 5V power levels. Two PCIe104 positions with user selection. Test position allows the PCIe104 card to be installed with access to the front and rear of the card. Production position mounts the PCIe104 within the standard PCIe mechanical allowing single slot operation within a standard chassis. ROHS or standard processing. Option for Zero Slot Fan. Industrial temperature components.