Dynamic Engineering - www.dyneng.com
Dynamic Engineering Product Pages
Order Cables
Carriers Adapters Converters
Order Chassis
Order cPCI
Order IndustryPack Modules
Order Misc.
PC104 PCI104 PC104p
Order PCI
Order PCI-X
Order PMC
Order PCIe
View Cart
     

Order PMC

 
Cable-MDM9-Spacewire
SpaceWire cable available in stock and custom lengths. Multiple options for connectors and wiring. Standard SpaceWire - male:male with TX/RX reversal. Contact the factory for other options or go to the SpaceWire cable page http://www.dyneng.com/SpaceWireCable.html


Quantity
 
mdmwizard_sm.jpg Cable-MDM9-Wizard
PMC Wizard Cable for Lab and/or Testing environments


Quantity
 
ccPmcHOTLink_f_sm.jpg ccPMC-HOTLink
6 HOTLink Channels + 12 differential IO [LVDS or 485]

Select Build Option, Extra Component Options and Engineering Kit Option
Quantity
 
ccPMCttl_sm.jpg ccPMC-Parallel-TTL
Conduction Cooled 64 Digital IO or 8 ADC and 32 IO w/ DMA, COS interrupts, PLL

Select Build Option, Extra Component Options and Engineering Kit Option
Quantity
 
ccPmcSpaceWire_f_sm.jpg ccPMC-SpaceWire
ccPMC-SpaceWire provides 4 ports of SpaceWire interface with FIFO buffering on a conduction cooled PMC.



Please select ordering options below:
Quantity
 
cPCI2PMC
cPCI2PMC (cPCI to PMC) adapter/carrier converter card provides the ability to install a PMC into a standard cPCI slot. cPCI2PMC has a PMC position mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 width 33/66 MHz bus operation. Optional fan. Optional ROHS processing. Options for Rear IO.

If you wish to order a version other than the standard cPCI2PMC, please select from below.
Quantity
 
cpcibpmc3u64_sm_f.jpg CPCIBPMC3U64
Using the drop down menus, select the board build options and add on options.
Quantity
 
cpcibpmc3u64et_f_sm.jpg CPCIBPMC3U64ET
cPCIBPMC3U64ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. cPCIBPMC3U64ET has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. cPCIBPMC3U64ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option.

Using the drop down menus, select your board build options and add on options.
Quantity
 
CPCIBPMC6U-ET
cPCIBPMC6U-ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install 2 PMC cards into a standard cPCI slot. cPCIBPMC6U-ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. Front and/or rear IO supported. PIM carrier available for Rear IO configurations.

Using the drop down menus, select your options:
Quantity
 
DESWBO
Dynamic Engineering SpaceWire Break-Out (DESWBO) Install between two SpaceWire nodes and monitor the signals between the two nodes. 24 test points per node [48 total], Credit/Byte count, decoded data, decoded characters NULL, FCT, Timecode received, EOP, EEOP, Credit Error, Disconnect Error, Escape Error, Parity Error. Activity LED's. International Power Supply included.
Quantity
 
deswcb_sm.jpg DESWCB
SpaceWire Connector Board with 1-28 connectors




Please select the # of connectors to be installed & the locations to install them.
Quantity
 
DINterm64_f_sm.jpg DinTerm64
DINterm64 provides a space efficient, low cost method of interconnecting the control electronics to the rest of the sensors, IO, machinery etc.


Quantity
 
HDEcable-2x1.jpg HDEcabl68
SCSI II/III cable - 68 pin high density SCSI connectors with latch blocks or 2-56 thumbscrew hardware in 3 ft. and 6 ft. lengths. Twisted pair construction. Use with PMC hardware such as Dynamic Engineering's PMC-Parallel-TTL etc.



Please select cable version below.
LB = Latch block (default)
TS = ThumbScrew
Quantity
 
hde100cablesm.jpg HDECable100
D100 Cable with 50 twisted pairs. Latch Block or Thumbscrew mating. Shielded and outer jacket. 3' and 6' standard plus custom lengths.

Quantity
 
HDEterm100sm.jpg HDEterm100
D100 to 100 Terminal positions




Please select from below if you wish to have a special version
Quantity
 
HDETerm68
SCSI II/III to 68 screw Terminal positions [standard]. SCSI II/III adapter to terminal strip. Custom termination options. Horizontal, Vertical and mixed connector options. Fully enclosed [with DIN rail mounting], open and engineering models available.

Please choose from the menus
Quantity
 
PCI2PMC
1/2 length PCI adapter carrier card with PMC mounting slot. Front panel and Pn4 IO access. 32 / 64 bit operation.




If you wish to order a version other than the standard PCI2PMC, please select from below.
Quantity
 
PCIBPMC
1/2 length Bridge Based PCI adapter carrier card with PMC mounting slot. 32/33 <=> 64/66 operation on PCI and PMC buses. Local power supply for 3.3V to PMC with option for backplane supply or local supply to be used. Options for adding Ethernet and Serial ports to use with PrPMC's. Options for Zero Slot Fans in either or both positions. Both legal for PMC and PCI mechanical requirements. Pn4 IO supported with a DIN rows A&C filled connector. Option for SCSI connector. Option for JTAG support. PCIBPMC: Order for a base version PCIBPMC-ROHS: ROHS processed card PCIBPMC-SCSI: Order for a SCSI Connector version PCIBPMC_RJ45&Ser: with Serial & Ethernet PCIBPMC-VIO3 PCIBPMC-SCSI-VIO3:; PCIBPMC-ENET-VIO3: with 2 ethernet ports, 3.3V PCIBPMC-SER-VIO3: with serial con 3.3V PCIBPMC-Customized: We cater to our customers special orders - please email your requirements for a PCIBPMC with modifications to meet your needs dedra@dyneng.com PCIBPMC Fan Options: PCIBPMC-FAN1 closest to the PCI bezel PCIBPMC-FAN2 closest to the PMC Connectors

Ordering Options: Please select the board version and engineering kit you wish to order.
Quantity
 
PCIbPMC-ET-f_sm.jpg PCIBPMC-ET
Ordering Options: Please select the board version and engineering kit you wish to order.
Quantity
 
pcibpmcx1_f_sm.jpg PCIBPMCx1
The PCIBPMCX1 provides the ability to install one PMC card into a standard PCI/PCI-X slot. Programmable 3.3 or 5V




Ordering Options: Please select the board version and engineering kit you wish to order.
Quantity
 
pcibpmcx2_sm_f.jpg PCIBPMCx2
PCIBPMCx2 PCI/PCI-X & PMC Compatible Adapter Carrier with 2 PMC positions. ROHS or Std processing. Optional FAN's, type of rear IO connector.



Ordering Options: Please select the board options you wish to order.
Quantity
 
PCIeBPMC
The PCIeBPMC (PCIe Bridge PMC 1 slot) adapter / carrier converter card provides the ability to install one PMC card into a standard PCIe 1 lane slot. Suitable for PCI operation with the PMC; 32 bit or 64 bit data and 33, 66 MHz. clock. Auto selected or switch programmable speeds. Bezel and Rear IO supported. On Board high capacity power supplies. Options for fans.

Ordering Options: Please select the board version, eng. kit & fan options you wish to order.
Quantity
 
PCIeBPMCx1
PCIeBPMCX1 ( PCIe Bridge PMC 1 slot) adapter / carrier converter card provides the ability to install one PMC card into a standard PCIe 4 lane slot. Suitable for PCI or PCI-X operation with the PMC; 32 bit or 64 bit data and 33, 66, 100 or 133 MHz. clock. Auto selected or switch programmable speeds. Built in high capacity power supplies. Industrial temperature. Rear IO supported with SCSI connector, PMC Bezel IO through the PCIe bezel.

Ordering Options: Please select the board processing, connector and fan options you wish to order.
Quantity
 
pimcarriersm.jpg PIM-Carrier
The PIM Carrier board facilitates 2 PIM's. The PIM Carrier facilitates rear panel IO in cPCI based systems using PMC's

Need a cPCI card..we have those too www.dyneng.com/cpci.html

Using the drop down menus, select your board build options and add on options.
Quantity
 
pim_rear_sm.jpg PIM-Parallel-IO
The PIM-Parallel-IO facilitates rear panel IO. A PIM Carrier is mounted to the underside of the backplane. The Pn4 [PMC] IO is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. Most PIM Carriers have two PIM sites which correspond to the two PMC's mounted to the host card. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O.



Using the drop down menus, select your board build options and add on options.
Quantity
 
PIM-Universal-IO
The purpose of the PIM-Universal-IO is to facilitate rear panel IO in cPCI systems. A PIM Carrier is mounted to the underside of the backplane. The Pn4 "user IO" on the PMC is routed through the host "carrier" board to the backplane.is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O.



Using the drop down menus, select your board build options and add on options.
Quantity
 
PMC-Bis2x1.jpg PMC-BiSerial/BiFIFO-16k
The parallel Input and Output channels are highly programmable and fully independent. The standard interface offers Data, Clock and Strobe. The 32 RS485 channels are programmable as input or output allowing for a variety of implementations. The programmable output rates and RS422/485 compatibility will interface to a multitude of systems. If your situation demands a custom application then we will update the Xilinx FPGA. Send us your timing and we will send you the interface.... email us your wish list or call today!

Please select card version and engineering kit/Driver options below:
Quantity
 
PMC-Bis2x1.jpg PMC-BiSerial
provides 20 independent RS485 IO in one PMC slot plus FIFO memory and state machine control. Basic design provides independent RX and TX differential serial IO at up to 12 MHz. Custom state machine designs. NOT recommended for new designs Please refer to the PMC-BiSerial II or III for all new development


Please select card version and engineering kit/Driver options below:
Quantity
 
PMC-BisII2x1.jpg PMC-BiSerial-II NG1
PMC Biserial II NG1 features multiple serial protocols


To order with a driver or Engineering kit w/order please select from below:
Quantity
 
PMCbis-2x1.jpg PMC-BiSerial-II-NVY2
128K X 32 FIFO's provides multiple serial protocols. The Nvy protocol implemented provides Manchester encoded data inputs and outputs.


To order with a driver or Engineering kit w/order please select from below:
Quantity
 
pmc_bis3_f_sm.jpg PMC-BiSerial-III
The PMC Bi-serial has been updated to be even better. Building on the knowledge and experience gathered from multiple IP and PMC Bi-Serial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. 34 - 40/200 MHz 485/LVDS buffers with programmable termination and direction can be configured to your systems requirements. An expanded faster FPGA will implement the most complex state-machines.


Select card version, build options & engineering kit/Driver options below:
Quantity
 
PMC-Bis2x1.jpg PMC-BiSerial-IO-II
PMC-BiSerial-II (16Kx32FIFO)Standard. The PMC BiSerial has been updated to be even better. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-II. The BiSerial II features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. 32 - 20/40 MHz 485 buffers with programmable termination and direction can be configured to your systems requirements. An expanded faster FPGA will implement the most complex state-machines. The connector pinouts are the same for the first 20 channels to help with migration of older designs.



Please select card version and engineering kit/Driver options below:
Quantity
 
pmcextendiosm.jpg PMC-ExtendIO-II
PMC extender board/cable set



Please select cable length
Quantity
 
PMC-MC-X2
PMC-MC-X2 PMC Mini Carrier with 2 positions, selectable PCI clock rate, 32/64 bit operation, arbitration, interrupts, cooling, industrial temperature components. internal power supplies (3.3V, 5V, 12V, -12V). Options for Rear IO, Reference voltage range


Quantity
 
pmc_mc_x4_f_sm.jpg PMC-MC-X4
PMC-MC-X4 is a 4 position PMC carrier with 2 positions front and 2 rear. Power supplies, bus arbitration, interrupt routing, carrier level terminations etc. supplied. PrPMC in position 0 usually to control 3 additional PMC's in positions 1-3. Options for 12, 28V reference, power connector type and more.
Quantity
 
PMC-Parallel-485
Standard model provides 32 independent RS-485 IO plus clock reference and clock enable. All IO can be interrupt sources. Custom state machine designs. NG1 version has special counter timer circuitry, NRC1 version has COS interrupt capability.

Design has Industrial temperature components standard. Front and/or rear IO. Reference Application and drivers available.

To include a drive or Engineering kit w/order please select from below:
Quantity
 
PMC-Parallel-IO
PMC-Parallel-IO provides 64 independent IO in one PMC. Open drain with pull-ups. Interrupts, Win7 driver/ reference SW


Quantity
 
pmc_parallel_ttl_f_sm.jpg PMC-Parallel-TTL
PMC-Parallel-TTL provides 64 independent IO in one PMC slot.



Select Build Option, Extra Component Options and Engineering Kit Option
Quantity
 
pmc_serial_sm.jpg PMC-Serial
PMC-Serial / PMC-4U / UART channel board The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols UART and SCC Replace several cards with one to save time, cards, slots and dollars.



Please select engineering kit/Driver options below:
Quantity
 
PMC-Spacewire
PMC-SpaceWire provides 3[bezel] or 4[rear IO] SpaceWire interface nodes with FIFO buffering. PMC Format. Up to 200 MHz operation. Windows, Linux, VxWorks. Cables, debugging tools offered. Option for additional memory.



Please select ordering options below:
Quantity
 
PMC-Wizard
PMC-Wizard is intended to be used in ultra high-speed bidirectional point-to-point data transmission systems. DMA, local memory, two channels per card, industrial Temp Spartan 6.



Please select from the options below
Quantity
 
pmc_mc_x2_ch_f_sm.jpg PMC-X2-Chassis
2 position PMC Mini Carrier Chassis. PMC's are mounted sandwich fashion about the midplane. The midplane "backplane" has the power supplies, bus arbitration, clock generation etc. needed for a complete system.

Ordering Options: Please confirm the chassis and select the motherboard options you wish to order.Quantity
 
pmc_xm_f_sm.jpg PMC-XM
PMC Transition Module for IO, PLL and RAM support The PMC-XM is intended for use in situations where the user wants to control the design.

To order with a driver or Engineering kit w/order please select from below:
Quantity
 
pmc2pci_f_sm.jpg PMC2PCI
Adapter/carrier card mounts in a PMC slot and provides a PCI slot.




Please Select Ordering Options:
Quantity
 
PMC-XM-DIFF
PMC XM DIFF is designed to support user implementations. 34 Differential IO at your disposal. LVDS or 485. Matched length, controlled impedance routing. Front or rear IO options. LX60-11 model Virtex 4. PLL, Dip Switch. Driver, Reference SW, Reference VHDL implementation included.

Please select your IO type, Front or Rear IO, and Processing
Quantity
 
pmc_mc_x4_ch_f_sm.jpg PMC-X4-Chassis
4 position PMC Mini Carrier Chassis. PMC's are mounted side by side and sandwich fashion about the midplane. The midplane "backplane" has the power supplies, bus arbitration, clock generation etc. needed for a complete system.

Ordering Options: Please confirm the chassis and select the motherboard options you wish to order.
Quantity
 
HDRterm50
Ribbon cable to terminal strip adapter / converter. 50 position header with ejectors to connect to ribbon cable and 50 screw terminals in a flow through layout. Din rail compatible housing. Option for engineering version without screw terminals and header strip instead- suitable for scope, loop-back etc.

Ordering Options:
Quantity