Dynamic Engineering - www.dyneng.com
Carriers Adapters Converters
Dynamic Engineering Product Pages
Order Cables
Order Chassis
Order cPCI
Order IndustryPack Modules
Order Misc.
Order PCI
Order PCI-X
Order PCIe
Order PMC
PC104 PCI104 PC104p
View Cart
       

Order cPCI

CompactPCI product offering by Dynamic Engineering. Known for customization, Dynamic Engineering easily modifies existing hardware to meet customer specifications.
 
Cable-MDM9-Spacewire
SpaceWire cable available in stock and custom lengths. Multiple options for connectors and wiring. Standard SpaceWire - male:male with TX/RX reversal. Contact the factory for other options or go to the SpaceWire cable page http://www.dyneng.com/SpaceWireCable.html


Quantity
 
cpci-6u-cool_sm.jpg CPCI-6U-COOL
cPCI 6U cooling Card with up to 12 fans installed. Choose your preferred locations with air flow onto the card in front or behind or mixed. Please read the definitions of forward and reverse carefully before selecting. 4.7 CFM per fan with zero slot model. 8 CFM with HV fan selection. Single 4HP slot with zero slot fan choice.


Please select your fan options and orientation below
Install locations - fill in the locations and direction of the air flow. The default selection is "NI Not-installed locations.
Fan direction: F= Fan blows back to front
R= Fan blows front to back
Quantity
 
cpci-j2-scsi-sm.jpg cPCI-J2-SCSI
cPCI-J2-SCSI connector board[CompactPCI]


Quantity
 
cpci_rcvr_cntl_f_sm.jpg cPCI-Receiver-Controller
Digital Radio Receiver Controller with SPI, A/D, D/A, clock references, UART, temperature, fused power


If you wish to order a version other than the standard please select from below.
Quantity
 
cPCI2IP
cPCI2IP is a 3U 4HP cPCI [CompactPCI] design with 2 IP positions. Both positions support 8 and 32 MHz operation [SW selectable] both IP interrupts, ID, IO, INT, MEM address spaces. Fused filtered power for each position. Windows, Linux, VxWorks support.


Using the drop down menus, select your board build options and add on options.
Quantity
 
cPCI2PMC
cPCI2PMC (cPCI to PMC) adapter/carrier converter card provides the ability to install a PMC into a standard cPCI slot. cPCI2PMC has a PMC position mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 width 33/66 MHz bus operation. Optional fan. Optional ROHS processing. Options for Rear IO.

If you wish to order a version other than the standard cPCI2PMC, please select from below.
Quantity
 
cpci4ipsm.jpg CPCI4IP
cPCI4IP is a 6U 4HP cPCI [Compact PCI] design with 4 IP slots. Options for Front, Rear and both for IO. Filtererd power to IP's, auto conversion of 32 bit accesses, full memory space available.


Using the drop down menus, select your board build options and add on options.
Quantity
 
cpcibpmc3u64_sm_f.jpg CPCIBPMC3U64
Using the drop down menus, select the board build options and add on options.
Quantity
 
cpcibpmc3u64et_f_sm.jpg CPCIBPMC3U64ET
cPCIBPMC3U64ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. cPCIBPMC3U64ET has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. cPCIBPMC3U64ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option.

Using the drop down menus, select your board build options and add on options.
Quantity
 
CPCIBPMC6U-ET
cPCIBPMC6U-ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install 2 PMC cards into a standard cPCI slot. cPCIBPMC6U-ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. Front and/or rear IO supported. PIM carrier available for Rear IO configurations.

Using the drop down menus, select your options:
Quantity
 
HDRterm50
Ribbon cable to terminal strip adapter / converter. 50 position header with ejectors to connect to ribbon cable and 50 screw terminals in a flow through layout. Din rail compatible housing. Option for engineering version without screw terminals and header strip instead- suitable for scope, loop-back etc.

Ordering Options:
Quantity
 
PCI2cPCI
PCI2cPCI Install a cPCI board into a PCI slot. Supports all PCI modes including Target, Master, DMA, interrupts etc. -32 supports 32 bit PCI connection. -64 supports 64 bit PCI connection. -32-IO supports 32 bit PCI and rear IO from the cPCI module.

Passive design with impedance controlled traces between PCI and cPCI connectors.
Quantity
 
PCI2cPCI-32
PCI2cPCI-32 Install a cPCI board into a PCI slot. This adapter supports 32-bit cPCI bus. Usually used with a 3U cPCI board. 6U devices can be used when the upper half of the PCI bus is not required. Supports all PCI modes including Target, Master, DMA, interrupts etc. Passive design with impedance controlled traces between PCI and cPCI connectors.
Quantity
 
PCI2cPCI-64.jpg PCI2cPCI-64
PCI2cPCI-64 Install a cPCI board into a PCI slot. This adapter supports 64-bit


Quantity