Made in USA
The Embedded Solutions Experts


Dynamic Engineering Mechanical Design and Packaging

Dynamic Engineering Mechanical Design Examples

Dynamic Engineering´s expertise in mechanical design includes ruggedized enclosures, EMI chassis and modules, thermal dissipating chassis [conduction and convection], and modules [conduction and convection], rack mount chassis, test equipment and flex circuits. Commercial, Industrial, and Mil-Spec designs. Our primary tool for Mechanical Design is SolidWorks. Dynamic Engineering frequently colaborates with our clients by sharing STEP files to support design modifications and manufacturing of clientized versions of our products or new custom mechanical aparatus.

Attention to detail is critical whether designing a simple custom bezel or something more complex. The designs shown below are meant to be a sampling of some of our work to show the kinds of things that are in our wheel house. Please note: all of the custom mechanical aparatus on all of our card designs were also done in house.




PC104, PC104p, PCI-104, PCIe104 chassis

Dynamic Engineering chassis to support rugged mount applications for PC/104p, PC/104, PCI-104, and PCIe104 applications. Forced air or conduction cooled.


PMC Mini Chassis with 2 positions shown

Dynamic Engineering chassis to support PMC applications needing 2 or 4 PMC´s. Forced Air.



SCSI Adapter Hub
Client design with controlled impedance interface between connector types. Custom chassis design. Pads for PCB, SolidWorks for chassis.
Client supplied sketch and pinout. Dynamic Engineering supplied schematic, layout, mechanical design and finished product.



DSDA
Client design with conversion between LVDS and 50 ohm, single ended and LVDS, commutator and LVDS. Local power supply with reverse power protection. Controlled impedance. Custom chassis design. Pads for PCB, SolidWorks for chassis.
Client supplied sketch and pinout. Dynamic Engineering supplied schematic, layout, mechanical design and finished product.



DSDA-20
The Discrete Signal Distribution Adapter has several implementations [4 so far] including the original DSDA and the more recent DSDA-20 version. The designs incorporate Chassis, PCB, Power Supply, and signal design.

These designs do a bit of everything and would be a great starting point for your project.


UltraMask Tape application system for applying paper and tape to windows and other surfaces for masking purposes. Handles Paper and Film. Dynamic Engineering Co-authored Patent #5,470,430.

Part Number:IP-Hardware
Ordering Options

    IP-Connector-Saver: Comes with 2 Connector Savers plus 4 standoffs and mounting screws. Add .534" air gap between the installed module and carrier.


    Other related models: IP-Debug-Bus is a test aparatus installed between the carrier and IndustryPack to allow the control / data signals to be monitored, hot swapped etc. , IP-Debug-IO is an adapter for the IP Module IO connector. Mates with the IndustryPack connector on one side and ribbon cable on the other. Ribbon Cable 50 pin can be used to connect to the IP-Debug-IO and your system or perhaps finish it off with HDRterm50 which converts 50 pin ribbon to screw terminal.

Custom Length SCSI Cable

Send us an e-mail - sales@dyneng.com with your requirements. Be sure to include the length, retention [clip / screw], and quantity. Please be aware that custom lengths will take several weeks to process. Pricing is quantity sensitive.

HDRterm50 Additional Information