Made in USA
The Embedded Solutions Experts
Stand Alone Relay
Undetectable active monitoring and data altering of two ethernet (RJ-45) lines.
S-A-Relay Description
- 4 RJ45 connectors
- 2 dual 5V relays
- LEDs
- 2 Mhz reference oscillators (other frequencies available upon request)
- 10/100 Ethernet compatible
- user programmable via the JTAG port for custom projects
- Headers are in place for additional control or IO Requirements
- Xilinx CPLD programmable with VHDL or Verilog
The Stand Alone Relay card uses +5V via a PC style power connector. The CPLD is programmed to set the relays to bypass mode if the power is off, the software enable input is not set, or if Resetn is active. If all conditions are in the operational mode then the relays are switched to pass through mode to allow other hardware access to the ethernet signals.
The s_a_relay has two headers. There are 31 connections from the headers to the CPLD used to control the S_A_Relay card. One of the connections is the pre-defined straight - bipass selection [SW_CNTL]. The local CPU can select the operation with this pin. The second predefined connection is RESETN. The rest of the signals are undefined and can be used to implement user requirments.
If case of loss of power, Reset or deselection the relays are set to the bipass mode so that the input and output ethernet channels are connected and the local host isolated. If the power is valid, the mode is selected and Reset is inactive then the second mode is selected so that the signals are routed through to the host for processing.
The CPLD has plenty of room for modifications in operation and a JTAG header to make the changes easy to implement, either by Dynamic Engineering or onsite by the client.
Part Number: S-A-Relay
Ordering Options
- S-A-Relay Standard Stand Alone Relay device
- -CC Suffix to add Conformal Coating
- -ROHS Suffix to add ROHS processing