Made in USA
The Embedded Solutions Experts


XMC-UNIV-TEST

PCIe adapter for XMC, vertical test orientation

Order This Item


Quantity

XMC-UNIV-TEST Description

  • Install 1-8 lane XMC device into a standard PCIe slot.
  • Vertical orientation rear mount XMC for access to component side
  • Supports DMA, Interrupts, all PCIe modes
  • 1 year warranty standard.
  • JTAG programmer header
  • Multiple grounds to support test equipment
The standard model uses the rear connectors, vertically oriented allowing almost full access to the primary side of your XMC. The standard model also has a SCSI connector interconnected with Jn4/Pn4 and Jn6 to bring rear IO out. Use with a SCSI cable and HDEterm68 for a handy breakout to your system, loop-back etc.

Plenty of Ground references for your logic analyzer or scope. JTAG connections for programming an FPGA.

XMC-UNIV-TEST is a passive device with impedance controlled traces interconnecting the Gold Fingers of the PCI edge connector to the XMC connectors. All PCIe signals are routed through including power, ground, PCIe bus signals. PMC-UNIV-TEST can be used for target and master mode accesses.

For test purposes the XMC device is mounted into your PC allowing Windows, Linux etc. and all of the tools available in a standard chassis. XMC-UNIV-TEST can be used in a conventional chassis. We tend to use with "open chassis" where the motherboard is removed from the chassis to have full access to both sides of the installed XMC device. Just a convenience factor for probing devices close to the backplane.

Part Number: XMC-UNIV-TEST
Ordering Options

  • XMC-UNIV-TEST 1-8 lane PCIe bus with Jn5, Jn6, Jn4 provided for PCIe connection to XMC module with SCSI support for Jn4/Jn6, Test Points on, JTAG. ↔ Intended for easy access to primary side of XMC.

XMC-UNIV-TEST Manuals

Click on the links to Download selected manuals in PDF format.
Download the XMC-UNIV-TEST User Manual with details of operation and pinout to Jn4/Jn6 PDF format.