Made in USA
The Embedded Solutions Experts
1553-Ribbon-Triax
Transition Module for IP-1553
1553-Ribbon-Triax Description
- Transition Module to interface with standard 1553 Triax cables
- Option to set RT addresses
- Option for DIN Rail mounting
- Mounting holes for chassis installation
- Compatible with IP-1553
- 1 year warranty standard
1553-Ribbon-Triax is used to adapt ribbon cable to Triax. IP-1553 supports 2 dual redundant MIL-STD-1553 interfaces. Most IP carriers have 50 pin ribbon cable headers for IO. 1553-Ribbon-Triax connects to ribbon cable and converts to Triax. The pin out from IP-1553 determined the cable connections to utilize. J0A/J0B form port 0. J1A/J1B form port 1
Also visible in the front side photo are H1 and H2. Neither are normally installed.
H1 is used to connect to IP-1553 JTAG port. Add -JTAG for this option.
H2 has the following signals [(1-5)EXT TAG CLOCK, XTRIG0, XTRIG1, INCMD0, INCMD1] Add -CNTL for this option.
The remote terminal address can be set in SW or the external RT addresses used for this purpose. The resistor positions when installed tie the associated bit to ground. RTAD00..RTAD04, RTAD0P = R1-R6 and RTAD10..RTAD14, RTAD1P = R7-R12
1553-Ribbon-Triax can be mounted to your system with the included mounting points. See 4 plated holes in the photo above. DIN rail mounting is also available. Add -DIN for this option
Also visible in the front side photo are H1 and H2. Neither are normally installed.
H1 is used to connect to IP-1553 JTAG port. Add -JTAG for this option.
H2 has the following signals [(1-5)EXT TAG CLOCK, XTRIG0, XTRIG1, INCMD0, INCMD1] Add -CNTL for this option.
The remote terminal address can be set in SW or the external RT addresses used for this purpose. The resistor positions when installed tie the associated bit to ground. RTAD00..RTAD04, RTAD0P = R1-R6 and RTAD10..RTAD14, RTAD1P = R7-R12
1553-Ribbon-Triax can be mounted to your system with the included mounting points. See 4 plated holes in the photo above. DIN rail mounting is also available. Add -DIN for this option
Part Number: 1553-Ribbon-Triax
Ordering Options
- 1553-Ribbon-Triax Transition Module to support IP-1553 system connections using Triax Cables.
- -JTAG Add header H1 to support JTAG programming of IP-1553
- -CNTL Add header H2 to provide access to signals : EXT TAG CLOCK, XTRIG0, XTRIG1, INCMD0, INCMD1.
- -DIN Add DIN Rail enclosure
- -ROHS Switch to ROHS compliant solder for header and connectors
1553-Ribbon-Triax Manuals
Click on the links to Download selected manuals in PDF format.
User Manual not required with this product
User Manual not required with this product